Zhengzhou Zhongding Heavy Duty Machine Manufacturing Co., Ltd
Lipu Dedicated to Designing and Manufacturing Ore-dressing and Drying Equipment
Add to Cart
Large Capacity Flotation Machine for Copper Lead and Zinc Ore Concentration
Introduction:
Flotation Machine is widely used for roughing, concentrating and reverse flotation of nonferrous metal that includes copper, lead, zinc, nickel and molybdenum, ferrous metal and nonmetallic minerals.
Features:
1. Large air-absorption capacity
2. Low energy consumption
3. Every cell owns three functions: air absorption, slurry absorption, and flotation separation, and the cells form a flotation separation loop by itself without any auxiliary equipment and are allocated horizontally, which favors the change of flow.
4. The circulation of mineral slurry is reasonable, and can avoid the disposition of coarse sand to the largest extent.
5. There is self-control device on the surface of mineral slurry, so it is easy to adjust it.
6. The impeller has backward inclined upper and lower vanes, which produce upper and lower circulation of mineral slurry respectively.
Working Principle:
Flotation machine is applicable for the separation of nonferrous metal and ferrous metal. It is also used for separating nonmetal, such as fluorite and talcum.Through V belt transmission, which brings centrifugal effect to form the negative pressure. On the one hand, the flotation machine inhales sufficient air to mix with ore slurry; On the other hand it stirs ore slurry and mixes with medication to form the mineralized froth. By adjusting the height of flashboard to control the liquid level and make the useful froth scraped by loam board.
Technical Parameters:
SF series Flotation Machine
| Model | Cell volume(m³) | Impeller diameter (mm) | Impeller speed (r/min) | Capacity (m³/min) | Main motor power (kW) | Scraper motor power (kW) | Weight (t/cell) |
| SF0.37 | 0.37 | 300 | 442 | 0.2-0.4 | 1.5 | 1.1 | 0.4 |
| SF0.7 | 0.7 | 350 | 400 | 0.3-1 | 3 | 1.1 | 0.9 |
| SF1.2 | 1.2 | 450 | 312 | 0.6-1.2 | 5.5 | 1.1 | 1.4 |
| SF2.8 | 2.8 | 550 | 268 | 1.5-3.5 | 11 | 1.1 | 2.2 |
| SF4 | 4 | 650 | 235 | 2-4 | 15 | 1.5 | 2.6 |
| SF8 | 8 | 760 | 191 | 4-8 | 30 | 1.5 | 4.3 |
| SF16 | 16 | 850 | 190 | 5-16 | 45 | 1.5 | 7.4 |
BF series Flotation Machine
| Model | Cell volume(m³) | Impeller diameter (mm) | Impeller speed (r/min) | Air inflow (m³/m2.min) | Capacity (m³/min) | Power (kW) | Weight (t/cell) |
| BF2.8 | 2.8 | 550 | 278 | 0.9-1.1 | 1.4-3 | 11 | 2.1 |
| BF4 | 4 | 650 | 235 | 0.9-1.1 | 2.4-4 | 15 | 2.6 |
| BF6 | 6 | 700 | 205 | 0.9-1.1 | 3-6 | 18.5 | 3.3 |
| BF8 | 8 | 760 | 188 | 0.9-1.1 | 4-8 | 22 | 4.1 |
| BF10 | 10 | 760 | 188 | 0.9-1.1 | 5-10 | 22 | 4.5 |
| BF16 | 16 | 850 | 195 | 0.9-1.1 | 8-16 | 37 | 8.3 |
| BF20 | 20 | 850 | 195 | 0.9-1.1 | 10-20 | 45 | 8.7 |
| BF24 | 24 | 920 | 181 | 0.9-1.1 | 12-24 | 45 | 9 |
KYF series Inflatable Flotation Machine
| Model | Cell volume(m³) | Impeller diameter (mm) | Impeller speed (r/min) | Air pressure of air blower (kPa) | Max. Air inflow (m3/m2.min) | Capacity (m3/min) | Main motor power (kW) | Scraper motor power (kW) | Weight (t/cell) |
| KYF1 | 1 | 340 | 281 | ≥12.6 | 2 | 0. 2-1 | 4 | 1. 1 | 0. 8 |
| KYF2 | 2 | 410 | 247 | ≥14.7 | 2 | 0. 4-2 | 5. 5 | 1. 1 | 1. 5 |
| KYF3 | 3 | 480 | 219 | ≥19.8 | 2 | 0. 6-3 | 7. 5 | 1. 5 | 1. 9 |
| KYF4 | 4 | 550 | 200 | ≥19.8 | 2 | 1. 2-4 | 11 | 1. 5 | 2. 2 |
| KYF8 | 8 | 630 | 175 | ≥21.6 | 2 | 3. 0-8 | 15 | 1. 5 | 4. 2 |
| KYF16 | 16 | 740 | 160 | ≥25.5 | 2 | 4. 0-16 | 30 | 1. 5 | 6 |
| KYF24 | 24 | 800 | 150 | ≥30.4 | 2 | 4. 0-24 | 30 | 1. 5 | 7. 5 |
| KYF38 | 38 | 880 | 138 | ≥34.3 | 2 | 10-38 | 37 | 1. 5 | 10. 3 |
Case :
Flotation Machine Shipped to India For Processing Coal
Date: 2016.04.27
