Zhengzhou Zhongding Heavy Duty Machine Manufacturing Co., Ltd
Lipu Dedicated to Designing and Manufacturing Ore-dressing and Drying Equipment
Add to Cart
Energy Saving Ceramic Ball Mill for Quartz Limestone Dolomite Kaolin Power 245kw
Brief Introduction of Ceramic Ball Mill
1. Design up to the requirement of filler mineral processing in Germany, different from traditional cement ball mill and metallurgical mill.
2. Length-to-diameter factor of ball mill is optimized, so as to avoid over grinding and achieve the best grinding effect.
3. Outlet part discharges powder fluently, no dilating, and no necessary to cool the tube.
4. Material discharge from outlet grit fluently, no swelling of the mill chamber, no need cooling of mill chamber.
5. Grinding media can be chosen for production of different fineness.
6. Grinding agent added for ultrafine powder production to improve grinding efficiency.
7. Perfect match between drive station and energy consumption of grinding, energy saving to the fullest extent possible.
8. Forming a closed system with air classifier, no dust emission pollution because of negative-pressure powder conveying.
9. Shape and material of liner and grinding media optimized according to German requirement, low break rate, and grinding efficiency improved.
10. For hard mineral, we have Ferro free design. Liner and grinding media are made of alumina ceramics, quartz, SILEX or special material.
Application of Ceramic Ball Mill:
Calcium carbonate ( marble, calcite, limestone, chalk), quartz, zircon, feldspar, barite, kaolin, dolomite, magnesite, alumina, ultrafine cement, clinker, slag, etc.
Technical Data:
| Model | Shell rotation speed(r/min) | Ball load(t) | Feeding size(mm) | Discharging size(mm) | Capacity | Motor power(kw) | Weight(t) |
| (t/h) | |||||||
| 900×1800 | 36~38 | 1.5 | ≤20 | 0.075-0.89 | 0.65-2 | 18.5 | 5.5 |
| 900×3000 | 36 | 2.7 | ≤20 | 0.075-0.89 | 1.1-3.5 | 22 | 6.7 |
| 1200×2400 | 36 | 3 | ≤25 | 0.075-0.6 | 1.5-4.8 | 30 | 12 |
| 1200×3000 | 36 | 3.5 | ≤25 | 0.074-0.4 | 1.6-5 | 37 | 12.8 |
| 1200×4500 | 32.4 | 5 | ≤25 | 0.074-0.4 | 1.6-5.8 | 55 | 13.8 |
| 1500×3000 | 29.7 | 7.5 | ≤25 | 0.074-0.4 | 2-5 | 75 | 16.8 |
| 1500×4500 | 27 | 11 | ≤25 | 0.074-0.4 | 3-6 | 110 | 21 |
| 1500×5700 | 28 | 12 | ≤25 | 0.074-0.4 | 3.5-6 | 130 | 25.8 |
| 1830×3000 | 25.4 | 11 | ≤25 | 0.074-0.4 | 4-10 | 130 | 29 |
| 1830×4500 | 25.4 | 15 | ≤25 | 0.074-0.4 | 4.5-12 | 155 | 35.5 |
| 1830×6400 | 24.1 | 21 | ≤25 | 0.074-0.4 | 6.5-15 | 210 | 43 |
| 1830×7000 | 24.1 | 23 | ≤25 | 0.074-0.4 | 7.5-17 | 245 | 43.8 |
| 2100×3000 | 23.7 | 15 | ≤25 | 0.074-0.4 | 6.5-36 | 155 | 34.8 |
| 2100×4500 | 23.7 | 24 | ≤25 | 0.074-0.4 | 8-43 | 245 | 38 |
| 2100×7000 | 23.7 | 26 | ≤25 | 0.074-0.4 | 8-48 | 280 | 56.6 |
| 2200×4500 | 21.5 | 27 | ≤25 | 0.074-0.4 | 9-45 | 280 | 51.8 |
| 2200×6500 | 21.7 | 35 | ≤25 | 0.074-0.4 | 14-26 | 380 | 60 |
| 2200×7000 | 21.7 | 35 | ≤25 | 0.074-0.4 | 15-28 | 380 | 62 |
| 2200×7500 | 21.7 | 35 | ≤25 | 0.074-0.4 | 15-30 | 380 | 64.8 |
| 2400×3000 | 21 | 23 | ≤25 | 0.074-0.4 | 7-50 | 245 | 54 |
| 2400×4500 | 21 | 30 | ≤25 | 0.074-0.4 | 8.5-60 | 320 | 65 |
| 2700×4000 | 20.7 | 40 | ≤25 | 0.074-0.4 | 12-80 | 380 | 94 |
| 2700×4500 | 20.7 | 48 | ≤25 | 0.074-0.4 | 12-90 | 480 | 102 |
| 3200×4500 | 18 | 65 | ≤25 | 0.074-0.4 | Determined by process conditions | 800 | 137 |
| 3600×4500 | 17 | 90 | ≤25 | 0.074-0.4, | Determined by process conditions | 850 | 158 |
| 3600×6000 | 17 | 110 | ≤25 | 0.074-0.4 | Determined by process conditions | 1250 | 175 |
Product Picture Show: