Zhengzhou Zhongding Heavy Duty Machine Manufacturing Co., Ltd
Lipu Dedicated to Designing and Manufacturing Ore-dressing and Drying Equipment
Add to Cart
Gold Processing Jigging Machine Gravity Separator Capacity 1-60 t/h
Introduction of Gold Jigging Machine
Gold Jigging Machine is a new type gravity separation equipment. It is widely applied in the separation of gold, tin, tungsten, titanium, hematite, coal and other minerals due to its high processing capacity, large range of separation size and simplicity of operation and maintenance.
Working Principle of Gold Jigging Machine
The selected mineral falls onto the screen panel of jig room to form a layer of material. To fill in the water through the sieve and make the beds loose and then the water level lower down (or stop rising). In this process, different density particles transfer, the heavy minerals enter into the lower layer, light minerals come into the upper level, after discharge to get concentrate and tailing.
The improvement is below: move in sawtooth waveform, the water rising fast but lowering down slow, the bed layer is whole up and falls slowly, the effective loose time is long, this whole process can greatly increase the capacity of screen surface units, and save the adding water quantity. The sawtooth wave jig recovery rates can improve Sn: 3.01%, WO3:5.5%, Pb: 1.63%, Zn: 2.04%, the water consumption lowers down 30-75%.
Technical data:
| Model | Stroke coefficient | Stroke (mm) | Frequency (times/min) | Capacity (t/h) | Power (kW) |
| JT1070/2 | 0.5 | 0-12 | 0-170 | 6-8 | 2.2 |
| JT1515/2 | 0.47 | 0-25 | 0-150 | 20-35 | 2×4 |
| JT2020/2 | 0.4 | 0-20 | 0-130 | 40-60 | 2×5.5 |
| 2LTC-366/8T | 0.68-0.41 | 0-50 | 120-300 | 3-6 | 2×1.1 |
| 2LTC/6109/8T | 0.52-0.35 | 0-50 | 120-300 | 20-30 | 4×1.5 |
| 2LTC-912/4 | 0.49 | 0-50 | 160-280 | 10-30 | 11 |
| 2LTC-912/4A | 0.49 | 0-100 | 120-160 | 20-40 | 11 |
| LTA55/2 | 0.5 | 0-25 | 250-350 | 1-5 | 1.5 |
| LTA1010/2 | 0.5 | 0-25 | 250-350 | 5-15 | 3 |
| LTA1515/2 | 0.5 | 0-50 | 200-300 | 30-50 | 5.5 |
| LTA2020/2 | 0.5 | 0-50 | 200-300 | 40-60 | 7.5 |
| AM-30 | 0.47 | 0-50 | 130-160 | 10-15 | 3 |
| LTP34/2 | 0.58 | 0-27 | 280-340 | 2-6 | 1.1 |
Product Picture Show :
